1.2.2. Jets of a sink of glasses

Removal

PERFORMANCE ORDER
1. To unscrew screws of an air lattice on a cowl cover, to cast away a lattice forward.
2. To wring out the screw-driver a jet stopper aside and to take out a jet.
3. To disconnect a liquid supply hose from a jet.

Installation

PERFORMANCE ORDER
1. To insert a jet from above before click.
2. To put on a liquid supply hose.
3. To establish a lattice and to screw.

Adjustment

PERFORMANCE ORDER
1. Adjusting amount of washing off of glass: and = 160 mm, b = 320 mm, with = 400 mm.
2. Back glass: with two-fold doors: and = 150 mm, b = 250 mm. With a wide (usual) trunk lid: the stream of a jet goes to the middle of the washed surface.
3. The direction of a stream of a jet can be adjusted if necessary a spoke (needle).