| 1. To install the car on supports. |
| 2. To clean brake pipelines means for cold cleaning. |
| 3. By means of a lamp to examine all brake pipelines going from the main brake cylinder to all brake cylinders. The main brake cylinder is in a cowl under a broad tank of brake fluid. |
| 4. At the installed anti-blocking ABS system brake pipelines from the main cylinder go to the hydraulic device (in front of the battery) and from there – to brakes of wheels. Should not follow from the hydraulic device of brake fluid at all. |
| 5. Brake pipelines should not be pressed or bent. Should not have traces of a rust or attritions. Otherwise to replace all pipeline before the following connection. |
|
6. Brake hoses connect pipelines to brake cylinders of the turned wheels. They are made of the material maintaining big pressure, but over time can become porous, inflated or made an incision about sharp objects. |
|
7. To bend hoses by hand in one and other party, for damage definition. Hoses should not be twisted. To pay attention to a color strip if is available! |
| 8. To turn a steering wheel to the right-to the left against the stop. Hoses should not concern parts of the car. |
9. Places of connections of brake pipelines and hoses should not be damp from the following liquid.
Prevention
The fact that the broad tank and consolidations damp from the acting brake fluid is not the proof of the faulty main brake cylinder yet. Mostly, it is the reason of an effluence of brake fluid from an opening of production of air for a cover or laying of a cover.
|
| 10. To remove the car from supports. |