2.5.1.1. 4-cylinder petrol engine
Adjustment of a tension of a gear belt
Easing
| PERFORMANCE ORDER |
| 1. To remove the top casing of a gear belt. |
| 2. To install on a tension roller nut adaptation, for example HA2ET 2587. |
| 3. To weaken a cap key the screw of fastening of a tension roller. |
| 4. To turn a tension roller to the left, aside opposite to an arrow (see rice. Adjustment of a tension of a gear belt) and to weaken a gear belt. |
|
Tension
| PERFORMANCE ORDER |
| 1. To turn a tension roller to the right, in the direction of an arrow (see rice. Adjustment of a tension of a gear belt) and to pull a gear belt. |
| 2. The gear belt, at impact on it big and index can be twisted by fingers in the middle between a driving gear wheel of a cam-shaft and an intermediate cogwheel on 90 °. |
| 3. To tighten a nut of fastening of a tension roller the moment of 45 N · m. |
| 4. To establish the top casing of a gear belt. |
| 5. To allow the engine to work. If the belt whistles, then as a rule, the tension is too big. |
|