9.13. Forward sitting
Fastening of sitting without bed
1. Six-sided screw 2. The screw with an internal hexagon 3. Adjustment mechanism |
4. Tires 5. Seat belt lock |
Depending on equipment various lobbies of sitting are established:
– rotating sitting without bed;
– unrotative sitting with or without bed;
– the sitting, next to the driver, can be executed in the form of a double banquette or folding seats.
Removal of seats without bed (rotating or unrotative)
PERFORMANCE ORDER |
1. To unscrew the screw with an internal hexagon (2) (the size of a key of 5 mm) of an internal guide of sitting (cm. rice. Fastening of sitting without bed). |
2. To release the mechanism of adjustment of sitting and to take out sitting from guides (3) in the direction of an arrow. |
3. At taking out from a guide (4), also the lock of a seat belt slips out (5). |
Prevention
At installation to tighten the screw with an internal hexagon the moment of 15 N · m.
|
|
Removal of folding passenger sitting
PERFORMANCE ORDER |
1. To unscrew 4 six-sided screws and to take out folding sitting. |
2. At installation to tighten screws the moment of 45 N · m. |
|
Removal of separate seats with a bed
PERFORMANCE ORDER |
1. If is available, to take out the additional rechargeable battery under sitting. |
|
2. To unscrew back screws (1). To remove sitting from fingers (2) back. |
Prevention
At installation to tighten six-sided screws the moment of 45 N · m, fingers the moment of 30 N · m.
|
|
Removal of double passenger sitting
PERFORMANCE ORDER |
|
1. To unscrew 5 six-sided nuts (3). |
Prevention
Remote washers (2) are established only in cars with a separate wall to provide easy access between a back of sitting and a separate wall. The remote nut (1) is established only in cars with right-hand management. The moments of an inhaling of a six-sided nut (3) and the lock screw (4) – 45 N · m.
|
2. To remove the next sitting. |
|