6.3. Spherical support and cross steering draft


1. To unscrew a nut of fastening of the spherical hinge.
2. To Vypressovat a pin of the hinge of cross steering draft by means of the press (a) which is available on sale from the lever of cross and steering draft.
3. To weaken a spherical support from cross and steering draft, considering at the same time turns. To write down for the subsequent assembly.


1. To screw the new hinge on cross and steering draft the same speed.
2. To clamp the hinge a lock-nut the moment of 55 N · m.
3. To insert a hinge pin into the lever of cross and steering draft and to clamp a new self-tightening nut the moment 40 N · m.
4. To check a convergence of wheels for HUNDRED.