10:15. Monitors
Index devices
Monitors can be removed after removal of a peak without guard of devices forward.
Removal
PERFORMANCE ORDER |
1. To disconnect a weight(s) cable from the rechargeable battery. |
Prevention
At the same time from memory of the radio receiver the anticreeping code is erased. To disconnect the rechargeable battery only at the switched-off ignition. Otherwise the control unit of system of injection will fail.
|
2. To remove a peak of devices (see subsection 10.19.8.1). |
3. Devices (1) and (3) are simply inserted and are taken out from a guard forward. |
4. If it is necessary to remove a speedometer (2), to remove the speedometer roller behind a guard of devices, having squeezed at the same time on each side plastic coupling. To unscrew screws (V) and to take out a speedometer. |
|
Installation
PERFORMANCE ORDER |
1. To install devices, to watch that plugs on a reverse side of devices precisely entered shtekerny contacts of the printed circuit board. |
2. To screw a speedometer, to connect the speedometer roller. |
3. To establish a peak of devices. |
4. To connect a weight(s) cable to the rechargeable battery. |
Prevention
To connect the rechargeable battery only at the switched-off ignition, otherwise failure of the control unit of system of injection is possible.
|
5. To determine time on hours. |
6. To enter an anticreeping code into the radio receiver. |
|