10.18.2. Magnetic relay

At the faulty magnetic relay the gear wheel of a starter is not thrown out and the engine is not started.

Check

PERFORMANCE ORDER
1. To remove a starter.
2. To connect to the plug 50 (connection of a thick cable) of a starter by means of additional wires tension of the rechargeable battery of 12 Century.
3. By means of an additional cable to connect starter plugs 50 and 30. The gear wheel of a starter has to be thrown out forward.

Removal

PERFORMANCE ORDER
To unscrew 3 screws of fastening of the magnetic relay from the driving case and to remove the relay.

Installation

PERFORMANCE ORDER
1. To screw the relay on a starter; to seal a dividing groove (F) at a starter of BOSCH with suitable sealant.
2. To screw a wire of the magnetic relay.
3. To check a starter.
4. To establish a starter.