1. To switch off the switch of the corresponding lamp. |
Headlight |
2. To open a cowl cover. |
3. If necessary to replace a lamp of a left headlight: to unscrew a protection of the rechargeable battery and to remove. |
4. To disconnect the plug on the back party of a headlight. |
5. To take off a rubber cap from the back party of a headlight. |
|
6. To squeeze a spring bracket (1) of the holder of a lamp and to cast away down. |
7. To take out a faulty lamp. |
8. Not to touch by hands of a flask of a new lamp. To establish a lamp so that noses entered the corresponding cuts of the case. The average uvula on a socle of a lamp has to be above. |
9. To lift a spring bracket, to squeeze and stop. |
|
10. To put on a rubber cap the back party of a headlight, having pushed uvulas cuts. To put on the plug a frame. |
11. If acted, to establish and fix a protection of the rechargeable battery. |
12. To check adjustment of headlights for HUNDRED. |
Parking light in front |
13. The lamp of parking light is in a headlight reflector. To turn a lamp for a socle to the left and to take out back from a reflector. The connecting wire on a socle can be not removed. |
14. To drown a lamp in a frame, to turn to the left and to take out. |
15. To insert a new lamp, to turn to the right and to stop. |
16. To insert a lamp frame into a reflector and to turn against the stop to the right. |
Forward index of turn |
17. To open a cowl cover. |
18. To insert the screw-driver from above between a headlight and the case of the index of turn. The lock uvula will be unbent aside. |
|
19. To lower the screw-driver forward, in the direction of an arrow, having taken out, thereby, the case of the index of turn forward. |
20. To take out the index of turn forward assembled. |
21. To turn a lamp frame to the left and to take out from the case. |
|
22. To drown slightly a lamp in a frame to turn on 90 ° (1/4 turns) to the left and to take out. |
23. To establish a new lamp, to press and turn slightly to the right. |
24. To insert a frame into the case of the index of turn (to turn to the right against the stop). |
25. To insert an index lamp into guides (above and below), to press until the lock uvula is latched. |
Fog light |
26. To unscrew to the left a protective cap on the back party of a fog light (under a bumper). |
27. To remove a spring bracket of the holder of a lamp, to take out the fused lamp. |
28. To establish a new lamp so that noses entered the corresponding cuts of the case. |
29. To put on and stop a spring bracket. |
30. To screw a protective cap. |
31. To check adjustment of fog lights for HUNDRED. |
Back lamps |
32. To open a trunk lid. |
33. To undertake from a luggage carrier both lock languages of the block of lamps to squeeze them together and to take out the block inside. |
|
34. To drown a faulty lamp, to turn to the left on 45 ° and to take out. |
35. To drown a new lamp in a frame, to turn to the right and to stop. |
36. To insert the block of lamps into the case, uvulas have to be latched. |
Back fog lamp |
|
37. To press a lock uvula of a fog lamp (shooter) and to take out the lens. |
38. To take out the lamp case. |
39. To turn a frame of a faulty lamp to the left and to take out. |
40. To unscrew a lamp from a frame to the left and to replace. |
41. To establish the lens of a lamp by the left side and to drown until the lock uvula is not latched. |
Illumination of registration plate |
|
42. Lamps of registration plate are fixed by 2 screws everyone (are specified by shooters). To unscrew the crosswise screw-driver the lens. |
43. To take out a lamp of illumination of registration plate. |
44. To take out a frame from a lamp. |
45. To drown slightly a lamp in a frame, to turn to the left on 90 ° (1/4 turns) and to take out. |
46. To establish a new lamp, to drown and turn slightly to the right. |
47. To establish a lamp. |
48. To establish the lens and to screw not strongly. To switch off the switch of the corresponding lamp. |
Replacement of a lamp on a car plafond |
49. To take out the night lamp for the party opposite to the switch. |
50. To turn a lamp frame on a reverse side on 90 ° { 1/4 turns) to the left and to take out a lamp. To establish a new lamp. |
51. To take out the lens and to replace a sofitny lamp. If the lamp sits unsteadily, to turn in contacts. |
52. To install the lamp in a plafond cut. |
Lighting lamps of a footboard and illumination of a luggage carrier |
53. To insert the narrow screw-driver into a sidecut of the lens (from opposite to the switch) and to take out the lamp. |
54. To replace a sofitny lamp. If the lamp is an easy fit, to turn in slightly contacts. |
55. To insert the lamp in the beginning the party to the switch, then to insert other party. |
56. To squeeze the lens and to take out. |
57. To drown a lamp slightly in a frame, to turn to the left on 90 ° (1/4 turns) and to take out. |
58. To establish a new lamp, to drown and turn slightly to the right. |
59. To establish the lens and to stop. |